Setting up Trixbox with Magnet’s Voicenet / VoIP Solution

Magnet offer VoIP to customers throughout Ireland.  Please see the guide below on setting up Voicenet with the Trixbox PBX system.

Please note, the below configuration was carried out on a MAGNET BROADBAND LINE, behind a ONE ACCESS ROUTER with NAT turned on.  Magnet Broadband do not allow connections to sip.magnet.ie from external ISP’s unless notified.

1). Download, install and configure Trixbox.

2). Follow the steps listed below

a). Login to the Trixbox webportal ( http://yourip ) and click on the switch ( http://yourip/maint ) link.
b). Enter the default admin login – maint for username and password for password.
c). Next, click the PBX tab and then select PBX Settings.
d). On the left hand toolbar, click Trunks under the Basic menu.
e). Click Add Sip trunk
f). Enter the following settings

General
=======
Outbound Call ID:  012345678 (set to your caller id or leave blank)
Maximum Channels: 10 (max for standard Voicenet plans – set this to the number provided by the Magnet Voicenet Team.)

Outgoing Dial Rules
===================
Dial Rules:
Dial rules wizards: (Select from the drop down list)
Outbound Dial Prefix:

Outgoing Settings
=================
Trunk Name: Magnet
Peer Details:

host=sip.magnet.ie
isallow=all
allow=alaw&ulaw
fromuser=XXXXXXXX
username=XXXXXXXX
secret=ENTERPASSWORD
insecure=very
type=peer
nat=yes

Incoming Settings
=================
User Context: magnet-in
User details:

host=sip.magnet.ie
fromuser=XXXXXXXX
username=XXXXXXXX
secret=ENTERPASSWORD
insecure=port,invite
type=peer
nat=yes

Registration
============
Register String: <sipuser:password@sip.magnet.ie/012345678>

3). Click the submit button and then reload the changes.

4). On the left hand menu, click on System Status.

5). IP Trunks Online / IP Registrations should now be green and active.

6). Congratulations – next task is to setup the extensions to use with your Voicenet Trixbox system 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *